Max. flow rate 2,000 l/h
Max. working pressure 210 bar
Standard voltage 400 V
OERTZEN C210-30 E
Cold water high-pressure cleaner for industrial use
Max. flow rate 2,000 l/h
Max. working pressure 210 bar
Standard voltage 400 V
High flow rate for long operating times
The C210-30 E is characterised by a long service life and reliable functionality: With its heavy-duty design built for continuous operation, the high-pressure cleaner is ideal for industrial cleaning tasks such as container, cattle shed or tank cleaning.
- Three-cylinder in-line piston pump, flange-mounted with electric motor
- Motor/pump speed: 1,420 rpm
- Four-wheel trolley plus parking brake
- Integrated thermal valve protects against overheating
- Integrated low water pressure cut-off prevents cavitation
- Ultra-fine water filter prevents contamination
Technical details
Special version
- Optionally available in stainless steel for potentially explosive environments
High-pressure hose
- Untwisting joint prevents twisting of the high-pressure hose
- Comfortable handling
Spraying equipment
- Can be optionally equipped with two spraying kits
Motor and pump performance
- 400 V/3~50 Hz
- Max. working pressure 210 bar / 3045 psi
Features
- 3 cyl. inline plunger pump 33 l/min / 8.7 gal/min, flanged to electric motor
- brass pump head, ceramic plungers
- motor/pump rpm 1,420 1/min, slowly, quietly running machine
- pump system pressureless by closing spray pistol (stand by operation)
- thermo valve protects pump from overheating
- water shortage control protects pump from cavitation
- water micro filter protects pump from soiled water
- motor/pump unit protected by solid, surrounding steel frame (powder coated)
- chassis with 4 wheels on twin axle, locking brake
- hose swivel prevents hp hose from curling up
Standard equipment
- double lance 660 mm / 26 in (710.700.022)
- HIP flat stream nozzle10 (710.712.510)
- high pressure security pistol 330 bar / 4785 psi 3/8"
- insulated handle 560 mm / 22 in (710.700.001)
- swivel joint (710.708.050)
- PANZERJET high pressure safety hose NW 8, 10 m / 33 ft (710.702.064)
Application range
- container cleaning
- floor cleaning
- facade cleaning
- high pressure cleaning
- industrial cleaning
- drain cleaning
- tank cleaning
710.800.847
Turbo floor cleaner BRW 470 VA/R
floor cleaning device, INOX, for slip-free floors and other traffic areas, removal of oil from floors
- working width 470 mm / 18 in
- max. 250 bar / 3625 psi
- hot water max. 90 °C / 194 °F
- rotary nozzle elements for high surface cleaning capacity
- easy coupling to hp cleaner
Product request
710.700.020
Double lance, 380 mm / pressure regulation, VA
- with pressure regulation
- 350 bar / 5075 psi
- INOX
- length 380 mm / 15 in
- no-tool coupling
- HIP flat stream nozzle
- nozzle protection cap
Option: Ex-design – for use in explosion endangered areas
Product request
710.700.021
Double lance, 490 mm / pressure regulation, VA
- with pressure regulation
- 350 bar / 5075 psi
- INOX
- length 490 mm / 19.3 in
- no-tool coupling
- HIP flat stream nozzle
- nozzle protection cap
Option: Ex-design – for use in explosion endangered areas
Product request
710.700.022
Double lance, 660 mm / pressure regulation, VA
- with pressure regulation
- 350 bar / 5075 psi
- INOX
- length 660 mm / 25.7 in
- no-tool coupling
- HIP flat stream nozzle
- nozzle protection cap
Option: Ex-design – for use in explosion endangered areas
Product request
710.708.054
Swivel joint, 3/8” / 500 bar VA
- 500 bar / 7250 psi
- INOX
- mounted between pistol and hose
- revents coiling up of hose
Product request
710.703.091
GEKA grommet, brass / 3/4” SL
brass, for connection of water hoses with high pressure cleaners or hydro extraction vacs, and also for extending water hoses
Product request
710.703.081
GEKA coupling, brass / 3/4” ID
for connection of water hoses with high pressure cleaners or hydro extraction vacs, and also for extending water hoses
Product request
710.700.001
HP safety gun, 330 bar, insulated grip
- ergonomically shaped
- thermally insulated
- impact-resistant housing made of glass fibre reinforced Makrolon
Product request
710.702.235
MAXIJET LF 20 m hose, 500 bar ISO
MAXIJET high pressure safety hose
- 3/8"
- 20 m / 65.6 ft length
- nominal diameter 10
- max. 500 bar / 7250 psi
- 150 °C / 302 °F
- super smooth and non-abrasive
- other lengths on request
Product request
710.800.287
Sandblaster MONSOON VARIO 065
surface-protective granulate blasting system for all sensitive natural and artifical stone surfaces, facades, ornaments, monuments
- pressure range 5 – 250 bar / 72 – 3625 psi
- variable adjustment of blasting pressure, water flow and granulate consumption directly at the pistol
- with 10 m / 33 ft suction hose and duplex suction pipe for blasting agent
Product request
710.800.225
Wet overalls, size 46/48
- size M (46/48)
- water-proof polyamide fiber with zipper and velcro fastener on sleeves and trousers
- durable
- colour: orange-red
Product request
710.800.226
Wet overalls, size 50/52
- size L (50-52)
- water-proof polyamide fiber with zipper and velcro fastener on sleeves and trousers
- durable
- colour: orange-red
Product request
710.800.227
Wet overalls, size 54/56
- size XL (54-56)
- water-proof polyamide fiber with zipper and velcro fastener on sleeves and trousers
- durable
- colour: orange-red
Product request
710.800.228
Wet overalls, size 58/60
- size XXL (58-60)
- water-proof polyamide fiber with zipper and velcro fastener on sleeves and trousers
- durable
- colour: orange-red
Product request
710.802.003
OSP Special Hypoid Pump Oil, 5 l canister
OSP Special Hypoid Pump Oil
- 5 l / 1.3 gal canister
- for OERTZEN high pressure axial piston pumps, first oil change after 50 working hours, all further oil changes after 500 working hours respectively at least once a year
to maintain the warranty use OSP Special Hypoid Pump Oil only
Product request
710.702.079
PANZERJET 2 m hose, 500 bar ISO
PANZERJET high pressure safety hose
- 3/8"
- nominal diameter 8
- max. 500 bar / 7250 psi
- 150°C / 302°F
- 2 m / 6.5 ft length
Option: Ex design for operation in explosion endangered areas
Product request
710.702.078
PANZERJET 4 m hose, 500 bar ISO
PANZERJET high pressure safety hose
- 3/8"
- nominal diameter 8
- max. 500 bar / 7250 psi
- 150°C / 302°F
- 4 m / 13 ft length
Option: Ex design for operation in explosion endangered areas
Product request
710.702.064
PANZERJET 10 m hose, 500 bar ISO
PANZERJET high pressure safety hose
- 3/8"
- nominal diameter 8
- max. 500 bar / 7250 psi
- 150°C / 302°F
- 10 m / 32.8 ft length
Option: Ex design for operation in explosion endangered areas
Product request
710.702.065
PANZERJET 15 m hose, 500 bar ISO
PANZERJET high pressure safety hose
- 3/8"
- nominal diameter 8
- max. 500 bar / 7250 psi
- 150°C / 302°F
- 15 m / 49 ft length
Option: Ex design for operation in explosion endangered areas
Product request
710.800.061
Drain cleaning set, 33 m / 500 bar, without reel
for removal of blockings, grease and sand in production drains and pipes up to 350 mm / 13.6 in diameter
- industrial version
- with drain cleaning hose 33 m / 108 ft
- max. 500 bar / 7250 psi
- manually exchangeable 3/8" rocket nozzle and rocket drill-nozzle
- ball valve
- other lengths of hose on request
- 710.800.060 with 53 m / 174 ft drain cleaning hose
Product request
710.800.059
Drain cleaning set, 33 m / 500 bar, with reel
like drain cleaning set 710.800.061 plus hose reel (500 bar / 7250 psi), for removal of blockings, grease and sand in production drains and pipes up to 350 mm / 13.6 in diameter
- industrial version
- with drain cleaning hose 33 m / 108 ft
- max. 500 bar / 7250 psi
- manually exchangeable 3/8" rocket nozzle and rocket drill-nozzle
- ball valve
- other lengths of hose on request
Product request
710.719.777
3/8” rocket drill nozzle for drain cleaning, VA 777 (052)
- drain cleaning rocket drill nozzle 3/8" INOX (052)
- 500 bar / 7250 psi max.
- prescribed for OERTZEN cold water stationary unit C.S210-30 E
Product request
710.719.078
3/8” rocket nozzle for drain cleaning, VA 078 (050)
- drain cleaning rocket nozzle 3/8" INOX 050
- 500 bar / 7250 psi max.
- prescribed for OERTZEN cold water stationary unit C.S210-30 E
Product request
710.722.318
3/8” turbo rocket nozzle for drain cleaning, 30 mm / 065 VA
- drain cleaning turbo (rotating) rocket nozzle 3/8" INOX 065
- 250 bar / 3625 psi max.
Product request
710.800.350
Mobile sand container with TORNADO suction grip
sand-/blasting agent container
- 80 litres
- with sand suction group
- mobile
Product request
710.800.259
Sand suction nipple (1x)
Wear part, connects water-sand blasting nozzle via PVC hose with blasting agent container
Product request
710.800.410
High pressure sludge pump 05
A sludge pump connected to the high pressure cleaner pumps sludge and fluids up to a height of 5 m according to the Venturi principle (partial vacuum – the flow rate depends on the capacity of the high pressure cleaner).
- residue-free suction
- for tanks, barrels, pits, shafts, etc.
- suction hose diameter 1 1/2”
- hose length 3.5 m / 11.5 ft
Product request
710.703.011
Hose clamp, 20–32 mm / INOX
hose clamp 32 - 50 mm / 1.2 - 1.9 in, INOX, for water hoses with 3/4" inner diameter
Product request
710.800.769
Hose reel 300 bar, max. 60 m
for 30 m / 98 ft PANZERJET high pressure hose or 60 m / 197 ft JET high pressure hose
- execution in steel
- varnished
- high quality swivel
Product request
710.800.777
Hose reel, portable, for high-pressure trailer
for 20 m / 66 ft high pressure hose
- plastic
- with metal handle
- portable
- pic. shows optional PANZERJET high pressure hose (option)
Product request
710.700.031
Single lance, 800 mm, VA
- 400 bar / 5800 psi
- 800 mm / 31 in
- no-tool coupling
- without nozzle
- nozzle attachment and nozzle protector
Product request
710.704.120
Spray lance, 300 mm / extension
- no-tool coupling
- INOX
- 300 mm / 11.8 in (without nozzle)
- also as an adapter for turbo milling cutters and abrasive nozzles
Product request
710.704.125
Spray lance, 600 mm / extension
- no-tool coupling
- INOX
- 600 mm / 23.6 in (without nozzle)
- also as an adapter for turbo milling cutters and abrasive nozzles
Product request
710.704.121
Spray lance, 800 mm / extension
- no-tool coupling
- INOX
- 800 mm / 31.5 in (without nozzle)
Product request
710.704.122
Spray lance, 1,200 mm / extension
- no-tool coupling
- INOX
- 1200 mm / 47 in (without nozzle)
Product request
710.704.123
Spray lance, 1,500 mm / extension
- no-tool coupling
- INOX
- 1500 mm / 58 in (without nozzle)
Product request
710.704.124
Support grip for 1/4” lance, 330 bar
Product request
710.800.521
TIR (aqua motor), 2 nozzles, VA
Three-dimensional working internal tank cleaner with water motor
Product request
710.800.503
TIR, V4A / vacuum-proof, 500 mm
- with electric motor drive 230 V/1~50 Hz
- vacuum proof
- rotating 2 nozzle spray head cleaning inside of containers from 200 to 6000 l / 53 to 1584 gal
- working power max. 200 bar / 2900 psi
- water temperature max. 100° C / 212° F
- inlet opening min. 50 mm / 2 in
- shaft made of INOX
- length 500 mm / 20 in
- to be coupled to stationary or mobile high pressure cleaners
Extra versions on request: e. g. driven by low voltage or compressed air motor (EX safe for use in explosion endangered areas), 4 nozzle spray head, water temperature 150° C / 302° F, shaft stainless steel V4A, immersion lengths 500 to 4000 mm / 19 to 156 in, extra holders for various tank inlet opening
Product request
710.800.504
TIR, V4A / vacuum-proof, 1,000 mm
- with electric motor drive 230 V/1~50 Hz
- vacuum proof
- rotating 2 nozzle spray head cleaning inside of containers from 200 to 6000 l / 53 to 1584 gal
- working power max. 200 bar / 2900 psi
- water temperature max. 100° C / 212° F
- inlet opening min. 50 mm / 2 in
- shaft made of INOX
- length 1000 mm / 39 in
- to be coupled to stationary or mobile high pressure cleaners
Extra versions on request: e. g. driven by low voltage or compressed air motor (EX safe for use in explosion endangered areas), 4 nozzle spray head, water temperature 150° C / 302° F, shaft stainless steel V2A / V4A, also vacuum proof, immersion lengths 500 to 4000 mm / 19 to 156 in, extra holders for various tank inlet opening
Product request
710.800.513
TIR double grip, chrome-plated
TIR internal tank cleaner, double grip, chrome-plated
Product request
710.800.510
TIR flange, polyamide 60/90/120
polyamide 60/90/120
Product request
710.800.511
TIR thread holder, M64/2”
M64-2"
Product request
710.800.512
TIR rubber tap hole fixture
Product request
710.800.301
Water sandblaster TORNADO 06
large-area water sandblaster for abrasive surface treatment such as concrete repair, colour removal, decoating, derusting,
- pressure range 100 to 500 bar / 1450 t 7250 psi
- beam angle 15°
with
- visor helmet
- protective goggles
- ear protection
- mobile container for blasting agent (80 l)
- regulation for blasting agent
- 10 m / 33 ft suction hose
Product request
710.800.352
TORNADO safety helmet, complete, red
with wire mesh visor, ear protectors and protective goggles
Product request
710.756.100
Turbo blaster 100 (400 bar)
special nozzle with rotating spot jet to achieve high impact pressure, excellent knock-out and flushing effect,
for high-pressure cleaners up to 400 bar / 5800 psi working pressure
Product request
710.000.941
Cartridge 5” / 50 µm (1x)
- made of polypropylene
- reliably retains all particles larger than 50 micrometers (µ)
- for protection of high pressure cleaner from dirty operating water
- recommended when operating at construction site
- packaging size 5 pcs.
Product request
710.000.938
Cartridge V2A 5” / 50 µm
- reliably retains all particles larger than 50 micrometers (µ)
- for protection of high pressure cleaner from dirty operating water
- recommended when operating at construction site
Product request
710.701.021
Water hose 3/4” / 20 bar, EPDM (sold by the metre)
- quality water hose 3/4" inner diameter
- sold by the metre
- multi-layer braided textile sleeving max. 20 bar / 290 psi
- internal and external rubber made of EPDM
- max. 120°C / 248°F
- resistant to oil and chemicals
- other lengths and diametres on request
- also with GEKA bajonet coupling on both ends available
Product request
Please note
on request
Seawater/DI water version
- all water-bearing parts chemically nickel-plated
- unit can be operated with seawater or completely demineralized (DI) water
on request
Stainless steel version
- stainless steel frame
- electropolished
on request
E 334 Ex explosion proof
for working in potentially explosive areas: E 334 Ex
on request
E 334 Ex VA explosion proof
- for working in potentially explosive areas: E 334 Ex VA T3
- photo: stainless steel frame with optional spring-loaded hose reel
on request
Safety Control Stop
switches motor off during long periods of standby
710.000.694
VacLav 1 Special voltage 440 V / 3~60 Hz
- electric motor, three phases
- frequency 60 Hz
- without plug
on request
Water supply / water tank
e.g. for DIN 1988 backflow prevention
Flow rate max.
2,000 l/h / 528 gal/h
Unloading pressure
230 bar / 3,335 psi
Working pressure max.
210 bar / 3,045 psi
Water temperature max.
cold water
Standard voltage
400 V/3~50 Hz
Pump speed
1,420 1/min
Power source
electric motor
Connecting power
12.5 kW
Thermo valve
standard
Safety Control Stop SCS
option
Dimensions (frame: L x W x H)
780 x 690 x 800 mm / 30.4 x 26.9 x 31.2 in
Weight
146 kg / 322 lb
Order number
710.000.134
Please notice
technical data are subject to alterations